Outboard decal Replicas - Find them here!

Evinrude 1983 70/75 HP

 

1 0281922 ENGINE COVER ASSEMBLY. USED ON 70 MODELS
1 0281923 ENGINE COVER ASSEMBLY. USED ON 75 MODELS

0281922, 0281923
0281922 0281923

20 0209519 PLATE,Applique,front

282043  0282043 DECAL SET

1983 E70ELCTE, E70TLCTE 70hp
1983 E75ERCTE, E75ERLCTE, E75TRLCTE 75hp

PAINT CHART

ES NO. PAINT    SPRAY  1 QT. CAN

1655    PRIMER 172757 376015
1689    SILVER 174068 282157
1678    WHITE  173744 392036
1612 (1) SILVER 172793 282157

(1) 75 ECT OR ERCT ONLY

EVINRUDE 1997 50 - E50ESLEUR

ENGINE COVER - EVINRUDE - ELECTRIC START ONLY

Diagram PCA1079G 696
https://cdn.datamanager.arinet.com/image/EJP/0761c2ea-773c-413c-9507-f0ad7556f699/Max
1
0284721 ENGINE COVER ASSY. - 50ES, 50TS
0284722 ENGINE COVER ASSY. - 50TL Only
0284724 ENGINE COVER ASSY. - 50JE Only
0284921 ENGINE COVER ASSY. - 40 Models
0284970 ENGINE COVER ASSY. - X50ESL Only

0284721, 0284722, 0284724, 0284921, 0284970

 

EVINRUDE DECALS

23 0284830 DECAL SET - 40 Models 50TL Only 50JE Only
3 0212497 LENS, Ev. Port & Stbd. 40 Models, 50TL Only, 50JE Only

20 0212769 PLATE, Applique - 40 Models
7 0212270 PLATE, Rear - 40 Models

0284830, 0212497, 0212769, 0212270

20 0212895 PLATE, Front This part replaces 0212771. 50TL Only
7 0212772 PLATE, Rear - 50TL Only

0284830, 0212497, 0212895, 0212771, 0212772

20 0212767 PLATE, Front - 50JE Only
7 0212768 PLATE, Rear - 50JE Only

0284830, 0212497, 0212767, 0212768

 

23 0284835 DECAL SET - 50ES, 50TS
20 0212895 PLATE, Front - 50ES, 50TS
7 0212896 PLATE, Rear - 50ES, 50TS

0284835, 0212895, 0212896


23 0284923 DECAL SET - X50ESL Only - (See Also E48ESLEDC )
20 0212914 PLATE, Front - X50ESL Only
7 0212915 PLATE, Rear - X50ESL Only

0284923, 0212914, 0212915

This Evinrude 0284923 DECAL SET. X50ESL Only fits the following models:

1996 48HP E48ESLEDC,
1997 35HP E50JEUC (JET)
1997 40HP BE40EEUC, BE40ELEUC, BE40TLEUC, BJ40EEUC, E40ELEUC, E40REUC, E40RLEUC, E40TEEUC, E40TELEUC, E40TLEUC, E40TTLEUC, HE40REUC, HE40RLEUC,
1997 50HP BE50RLEUC, BE50TLEUC, BE50TSLEUS, E50ESLEUR, E50TLEUC, E50TSLEUS,
1998 40HP BE40EECR, BE40ELECR, BE40TLECR, E40ELECR, E40RECR, E40RLECR, E40TEECR, E40TELECR, E40TLECR, E40TTLECR,
1998 50HP BE50ESECC, BE50RLECR, BE50TLECR, BE50TSLECC, E50ESLECC, E50TLECR, E50TSLECC,


ENGINE COVER - EVINRUDE - ROPE START ONLY
Diagram PCA0733B 1-96
https://cdn.datamanager.arinet.com/image/EJP/3e15d7ac-334b-44eb-80ea-85a16342e89b/Max

0284797 ENGINE COVER ASSY. - 40RL Only
0284922 ENGINE COVER ASSY. - 50RL Only

16 0212478 APPLIQUE, Ev., port & stbd 

17 0284834 DECAL SET - 40RL Only
17 0284924 DECAL SET - 50RL Only

Read more: EVINRUDE 1997 50 - E50ESLEUR

EVINRUDE 2004 150 E150FPXSRS BLUE/WHITE/FHL

 

ENGINE COVER

1) 0285658 ENGINE COVER Assy | (BLUE - Engine Cover., New P/N for 2004 This part replaces 0285623.
1) 0285657 ENGINE COVER Assy | (WHITE - Engine Cover., New P/N for 2004 This part replaces 0285612.
1) 0285659 ENGINE COVER Assy | FHL Models Only, New P/N for 2004 This part replaces 0285614.

 

 

DECALS BLUE MODELS

1) 0215238 BOMBARDIER - Front/Rear
2) 0215270 EVINRUDE Port/Stbd
3) 0215268 *DECAL, Stripe, Stbd
4) 0215269 *DECAL, Stripe, Port
5) 0215555 DIRECT INJECTION Port/Stbd | New P/N for 2004
6) 0215226 135 HP F/R
7) 0215227 150 HP F/R
8) 0215228 175 HP F/R
9) 0215243 EVINRUDE - Front
10) 0215555 DIRECT INJECTION Port/Stbd | New P/N for 2004

 


DECALS WHITE MODELS

1) 0215287 BOMBARDIER - Front/Rear
2) 0215288 EVINRUDE Port/Stbd
3) 0215291 *DECAL, Stripe, Strb
4) 0215292 *DECAL, Stripe, Port
5) 0215554 DIRECT INJECTION Port/Stbd | New P/N for 2004
6) 0215294 135 HP F/R
7) 0215295 150 HP F/R
8) 0215296 175 HP F/R
9) 0215279 EVINRUDE - Front
10) 0351222 SALTWATER EDITION - Port | New P/N for 2004
11) 0351237 SALTWATER EDITION - Starboard | New P/N for 2004
12) 0216969 EU, RCD II Compliant – Lower | New P/N for 2004 This part replaces 0215558.

More Articles …

  1. 1992 Johnson/EVINRUDE - 9.9/15 HP
  2. Johnson Evinrude 1987 90/110 HP - 1988 88/90/110/100 HP
  3. Evinrude/Johnson - 1982 - 4.5/7.50 HP
  4. 1997 EVINRUDE/JOHNSON 115 ENGINE COVER

Subcategories

  • Mercury-Mariner-Tracker-Force Outboard Decals

    DECAL DRY APPLICATION

    IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or service of our products. If you have not been trained in the recommended servicing or installation procedures for these or similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or operating the product.
    NOTE:After completing installation, place these instructions with the product for the owner's future use.
    IMPORTANT: This decal set must be applied dry. Do not use a soap and water mixture to apply this decal set.

    Tools, Materials, and Surface Requirements

    Tools and Materials

    • Decal application squeegee (3M® Applicator PA 1 Gold - recommended)
    • Air release tool (3M Air Release Tool 391x) or a straight pin - used to remove trapped air bubbles
    • Clean microfiber towel (Meguiar’s® Supreme Shine Microfiber Towel - recommended)
    • Spray bottles and labels for each cleaning solution
    • Cleaning solution:
      a. Liquid dishwashing soap
      b. Isopropyl alcohol
      IMPORTANT: Identify each spray bottle of cleaning solution with a label.

    Surface Requirements

    Special attention is required when applying decals to certain surfaces, including primed, painted, and certain plastics. All
    painted surfaces must be cured per the manufacturer's requirements. When applying decals to plastic surfaces, allow proper
    time for out gassing.

    Surface Preparation

    Application Temperature

    Apply the decal when the surface and ambient air temperature is between 16-373 °C (61-99 °F).
    NOTE: Applying the decal near the minimum temperature specification, the adhesive bond will develop more slowly than temperature in the mid to upper specification range.

    Step One General Cleaning

    IMPORTANT: Do not shortcut the cleaning process. All of the surfaces are considered contaminated prior to a thorough
    surface cleaning preparation.

    1. Mix a solution of 29.5 cc (1 fl oz) liquid dishwashing detergent with 3.7 Liter (4 US qt) of warm water.
    2. Rinse cowl with clean water.
    3. Dry the cowl with a clean Meguiar‘s Supreme Shine Microfiber Towel.
    4. Avoid detergents or preparations that contain waxes, oils, or lotions.

    Step Two Solvent Cleaning

    1. Mix a solution of isoprooyl alcohol and water to a 1:1 ratio. Store in a spray bottle and identify the solution with a label.
    2. Saturate a clean paper towel with the isopropyl alcohol and water solution.
    3. Wipe the cowl with the saturated towel followed immediately with a lint-free towel before the solution evaporates.
    NOTE: Isopropyl a/coho/ evaporates quickly. You must Wipe the surface immediately after applying the solution.
    4. When the paper towel becomes contaminated with dirt, discard it and use a clean paper towel saturated with the
    isopropyl alcohol and water solution.
    5. Ensure the surface has no contamination and is completely dry.
    6. Start to apply the decals immediately after solvent cleaning.

    Decal Application

    Application Tips

    1. Ensure that the surrounding work area and the surface are properly cleaned to avoid contamination.

    90-8M0143239 eng MARCH 2018       © 2018 Mercury Marine      -     Page 1 / 16

  • Evinrude-Johnson Outboard Decals
  • Nissan-Tohatsu Outboard Decals
  • Yamaha Outboard Decals
  • Suzuki Outboard Decals
  • Honda Outboards