Outboard decal Replicas - Find them here!

40/50/60 EFI SEA PRO - 35 JET (4 CYL.)(4-STROKE) - Cat.# 90-8M0118807 

> Mercury Marine [Updated: Jun. 16, 2025] > Outboard > 4 Stroke EFI > 50 HP EFI 4 CYL > [1C453840 & Up] - USA - Cat.# 90-8M0118807
> Mercury Marine [Updated: Jan. 16, 2020] > Outboard > 4 Stroke     > 50 EFI (4 CYL.)(4-STROKE) > [1C453840 & Up] - USA - Cat.# 90-8M0118807

Top Cowl DIAGRAM 28547

8M0118165 TOP COWL ASSEMBLY Mercury, Non Decaled
8M0118167 TOP COWL ASSEMBLY Mariner, Non Decaled
8M0118170 CAP Air Dam - Mercury Comes with Decal
+ 8M0159887 CAP AIR DAM MERC
8M0118172 CAP Air Dam - Mariner Comes with Decal

8M0118165, 8M0118167, 8M0118170, 8M0159887, 8M0118172,
8M0118165 8M0118167 8M0118170 8M0159887 8M0118172

 

Decals - Top Cowl Diagram 69052

MERCURY DECALS

1) 8M0107467 DECAL SET ME 40-60HP 4S 4CYL [1C453840] THRU [1C573809] (2013-2018)
7) 8M0063345 DECAL Lenz
8) 8M0063358 DECAL Lenz
9) 8M0088310 DECAL Command Thrust

2) 8M0156747 DECAL SET ME 30-60 HP 4S [1C573810] & Up (2019-2020)
15) 8M0159886 DECAL Lenz, Mercury
3) 8M0063348 DECAL Rear, 40
4) 8M0063349 DECAL Rear - 50
5) 8M0063350 DECAL Rear - 60

6) 8M0154663 DECAL Rear, 35
13) 8M0063354 DECAL Jet Drive

10) 8M0043701 M-ICON 39MM - Small
14) 8M0043702 DECAL M-Icon, 53mm Black

11) 8M0056643 DECAL Read Manual
12) 8M0105187 DECAL Tiller Handle

16) 8M0118181 DECAL SET Mercury, SeaPro (2013-2020)
17) 8M0063348 DECAL Rear, 40 SeaPro
18) 8M0063350 DECAL Rear - 60 SeaPro

19) 8M0118535 DECAL SET Mercury 40 Pro Italy Pro (2013-2020)
20) 8M0043707 DECAL M-Icon, 53mm Red

MARINER DECALS

21) 8M0098299 DECAL SET MA 40EFI 4CYL 4S
22) 8M0012388 DECAL Rear, 40

23) 8M0098300 DECAL SET MA 50EFI 4CYL 4S
24) 8M0012389 DECAL Rear - 50

25) 8M0098301 DECAL SET MA 60EFI 4CYL 4S
26) 8M0012390 DECAL Rear - 60

27) 8M0109251 DECAL Lenz, Mariner

Read more: 40/50/60 EFI SEA PRO - 35 JET (4 CYL.)(4-STROKE) - Cat.# 90-8M0118807

MARINER 115 - ARCHIVE CAT 84980 

 > Mercury Marine [Updated: Nov. 14, 2017] > Outboard > 2 Stroke Carb > 115 (6 CYL.) > ARCHIVE CAT 84980

MARINER 115

SERIAL NUMBER
115 (6 CYL.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USA 5738891 THRU 6436122
115 (6 CYL.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN 7191308 THRU 7208847

COWLING AND FRONT COVER

Diagram 84980-6

 

1  6497A7 FRONT COVER ASSEMBLY (W/O DECALS)

11 6498A9 WRAP AROUND COWL ASSEMBLY (W/O DECALS)

 

MARINER DECALS

87133A79 DECAL SET

Serial Number: 06127600 - Model: 7115620 - Model Version: ELPT
1980 MARINER 115 (6 CYL.) ELPT

 

9.9/15 H.P. - FISH-N-HUNT/FORCE/TRACKER (1996-1997) - Cat.# 90-809717 

> Mercury Marine [Updated: May. 17, 2018] > 
Outboard > Force > 9.9 H.P. (1996) > [0E127700 THRU 0E202999] - Cat.# 90-809717
Outboard > Force >  15 H.P. (1996) > [0E127700 THRU 0E202999] - Cat.# 90-809717

Cowl Assembly Top and Bottom Diagram 45330

1 
820154A2 TOP COWL ASSEMBLY Top (Painted)(WITHOUT DECALS)(FORCE) (TRACKER)
820154A8 TOP COWL ASSEMBLY
820154A4 TOP COWL ASSEMBLY Top (Painted)(WITHOUT DECALS)(FISH-N-HUNT)

820154A2, 820154A8, 820154A4
820154A2 820154A8 820154A4

DECALS

10 
820731A95 DECAL SET (9.9 HP FORCE MODEL)(INCLUDES FRONT REAR-PORT STARBOARD)
820732A95 DECAL SET (15 HP FORCE MODEL)(INCLUDES FRONT REAR-PORT STARBOARD)

11
826339A94 DECAL SET (9.9 HP FISH-N-HUNT MODEL) (INCLUDES FRONT-REAR-PORT STARBOARD)
855443A97 DECAL SET (9.9 HP FISH-N-HUNT MODEL) (INCLUDES FRONT-REAR-PORT STARBOARD)

809856A96 DECAL SET (15 HP TRACKER MODEL) (INCLUDES FRONT-PORT & STARBOARD WRAPAROUND STYLE)
854201A97 DECAL SET

14
8192811 PLATE Front - Bottom Support

 

Steering Handle / Twist Grip Throttle

F712894 DECAL Speed/Shift Indicator

F688585 DECAL Tilt Lock
8302531 DECAL Tilt Release

 

Swivel Bracket and Driveshaft Housing

818029 DECAL (Fuel Mix)
8180291 DECAL (Fuel Mix)

More Articles …

  1. 150 H.P. XR-2 MARATHON MAGNUM (V-6) (1978-1985 COMBINED BOOK) - Cat.# 90-818855
  2. 175 3.4L V6 PRO XS (4-STROKE)- [2B529482 & Up] - USA - Cat.# 90-8M0142638
  3. 225 EFI 4-STROKE
  4. MERC 500-7/8 - 50, 500 (4 CYL.) (1968-1970) - Cat# 90-48425

Subcategories

  • Mercury-Mariner-Tracker-Force Outboard Decals

    DECAL DRY APPLICATION

    IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or service of our products. If you have not been trained in the recommended servicing or installation procedures for these or similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or operating the product.
    NOTE:After completing installation, place these instructions with the product for the owner's future use.
    IMPORTANT: This decal set must be applied dry. Do not use a soap and water mixture to apply this decal set.

    Tools, Materials, and Surface Requirements

    Tools and Materials

    • Decal application squeegee (3M® Applicator PA 1 Gold - recommended)
    • Air release tool (3M Air Release Tool 391x) or a straight pin - used to remove trapped air bubbles
    • Clean microfiber towel (Meguiar’s® Supreme Shine Microfiber Towel - recommended)
    • Spray bottles and labels for each cleaning solution
    • Cleaning solution:
      a. Liquid dishwashing soap
      b. Isopropyl alcohol
      IMPORTANT: Identify each spray bottle of cleaning solution with a label.

    Surface Requirements

    Special attention is required when applying decals to certain surfaces, including primed, painted, and certain plastics. All
    painted surfaces must be cured per the manufacturer's requirements. When applying decals to plastic surfaces, allow proper
    time for out gassing.

    Surface Preparation

    Application Temperature

    Apply the decal when the surface and ambient air temperature is between 16-373 °C (61-99 °F).
    NOTE: Applying the decal near the minimum temperature specification, the adhesive bond will develop more slowly than temperature in the mid to upper specification range.

    Step One General Cleaning

    IMPORTANT: Do not shortcut the cleaning process. All of the surfaces are considered contaminated prior to a thorough
    surface cleaning preparation.

    1. Mix a solution of 29.5 cc (1 fl oz) liquid dishwashing detergent with 3.7 Liter (4 US qt) of warm water.
    2. Rinse cowl with clean water.
    3. Dry the cowl with a clean Meguiar‘s Supreme Shine Microfiber Towel.
    4. Avoid detergents or preparations that contain waxes, oils, or lotions.

    Step Two Solvent Cleaning

    1. Mix a solution of isoprooyl alcohol and water to a 1:1 ratio. Store in a spray bottle and identify the solution with a label.
    2. Saturate a clean paper towel with the isopropyl alcohol and water solution.
    3. Wipe the cowl with the saturated towel followed immediately with a lint-free towel before the solution evaporates.
    NOTE: Isopropyl a/coho/ evaporates quickly. You must Wipe the surface immediately after applying the solution.
    4. When the paper towel becomes contaminated with dirt, discard it and use a clean paper towel saturated with the
    isopropyl alcohol and water solution.
    5. Ensure the surface has no contamination and is completely dry.
    6. Start to apply the decals immediately after solvent cleaning.

    Decal Application

    Application Tips

    1. Ensure that the surrounding work area and the surface are properly cleaned to avoid contamination.

    90-8M0143239 eng MARCH 2018       © 2018 Mercury Marine      -     Page 1 / 16

  • Evinrude-Johnson Outboard Decals
  • Nissan-Tohatsu Outboard Decals
  • Yamaha Outboard Decals
  • Suzuki Outboard Decals
  • Honda Outboards