Outboard decal Replicas - Find them here!

1977 MERCURY 45, 4.5 HP (1 CYL.) 2 Stroke Carb - ARCHIVE CAT 69972 - MERC 4.5 

 > Mercury Marine [Updated: Feb. 17, 2023] > Outboard > 2 Stroke Carb > 4.5 (1 CYL.) > ARCHIVE CAT 69972 > MERC 4.5

MERC 4.5
SERIAL NUMBER

45, 4.5 (1 CYL.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USA 4107220 THRU 5595531 (1977)
45, 4.5 (1 CYL.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN 7045758 THRU 7147237
45, 4.5 (1 CYL.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8026540 THRU 8068064
45, 4.5 (1 CYL.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BEL 9072179 THRU 9258280

TOP COWL DIAGRAM  arch-69972-4


1
191- 5231A4 TOP COWL ASSEMBLY
UNITED STATES 4597261 AND BELOW
AUSTRALIA 8044349 AND BELOW
BELGIUM 9139799 AND BELOW
CANADA 7091997 AND BELOW

191- 6189A2 TOP COWL ASSEMBLY
UNITED STATES 4597262 AND UP
AUSTRALIA 8044350 AND UP
BELGIUM 9139800 AND UP
CANADA 7091998 AND UP

 

191-5231A4 , 191-6189A2,5231A4 , 6189A2,

 

MERCURY DECALS

- 37- 70645A75 DECAL SET - SERIAL GROUP #3
- 37- 73919A76 DECAL SET - SERIAL GROUP #7
- 37- 76900A77 DECAL SET - SERIAL GROUP #12 (1977)
- 37- 78615A78 DECAL SET - SERIAL GROUP #16
- 37- 86414A79 DECAL SET - SERIAL GROUP #15

OTHER DECALS
4 66394A1 HANDLE ASSEMBLY, THROTTLE SHAFT (throttle decal)

Serial Number: 4759641
1977 MERCURY 45, 4.5 HP (1 CYL.) 2 Stroke Carb
(MERCURY MARINE)
MERCURY MARINE
DIVISION OF BRUNSWICK CORP.
FOND DU LAC, WIS. 54935 U.S.A.
- OPERATION -
TROLL
1. USE RECOMMENDED GASOLINE AND OILS.
2-OPEN TANK VENT.
3. CONNECT FUEL LINE AND PRIME WITH BULB.
4. PLACE SHIFT LEVER IN NEUTRAL.
5. PLACE THROTTLE IN START POSITION.
   SERIAL NO. [ 4759641 ]
6. PULL STARTER ROPE, IF MOTOR IS COLD USE CHOKE.
7. PRESS STOP BUTTON OR CHOKE TO STOP.
8. SHIFT GEARS ONLY WITH MOTOR RUNNING.
9. DISCONNECT FUEL LINE WHEN NOT IN USE

Mercury Racing Outboard 4 Stroke 500R 4.6L V8 Verado - Cat.# 90-8M0211036 

 > Mercury Marine [Updated: Aug. 4, 2023] > Outboard > 4 Stroke > 500R 4.6L V8 Verado > [1E099432 & Up] - Cat.# 90-8M0211036

Top Cowl 76560 Diagram

1) 8M0210423 TOP COWL ASSEMBLY Black
1) 8M0210426 TOP COWL ASSEMBLY Cold Fusion White
1) 8M0211061 TOP COWL ASSEMBLY Paint Ready

8M0210423, 8M0210426, 8M0211061
8M0210423 8M0210426 8M0211061

 

Decals 76566 Diagram

1) 8M0208889 DECAL KIT Paint Ready
2) 8M0142577 DECAL Read Manual, Clear
3) 8M0142371 DECAL Read Manual, Black
4) 8M0149565 DECAL Mercury, Black
5) 8M0147920 DECAL Mercury, Silver
6) 8M0151525 DECAL MI-CON 53 MM, Racing Not defined Placement
7) 8M0213286 DECAL Rear 500
8) 8M0080153 DECAL M-ICON 66 MM Racing Not defined Placement
9) 8M0149566 DECAL Red, R
10) 8M0149568 DECAL Black, R
11) 8M0213288 DECAL SET Top Cowl
12) 8M0151525 DECAL MI-CON 53 MM, Racing Not defined Placement
13) 8M0143773 DECAL SET Lower Cowl
14) 8M0213289 DECAL Check Engine
15) 8M0142569 DECAL Warning
16) 8M0213291 DECAL Maintenance Schedule

Accent Panel 76562 Diagram

1) 8M0210439 ACCENT PANEL Devil Red-Eye
1) 8M0210440 ACCENT PANEL Graphite Grey
1) 8M0172910 ACCENT COWL ASSEMBLY Carbon Fiber (Non-Decaled) Must Purchase 8M0208889
 -  8M0205360 DECAL KIT Accent Panel
2) 8M0147920 DECAL Mercury, Silver Paint Ready
2) 8M0149565 DECAL Mercury, Black
3) 8M0213286 DECAL Rear 500
4) 8M0149566 DECAL Red, R
4) 8M0149568 DECAL Black, R
5) 8M0080153 DECAL M-ICON 66 MM Racing

Problem found on M Racing logos in this Generation orders a complete kit where a 60 mm logo was received ( No part number marked behind the M logo), instructions or Installation templates points 8M0085374, size not found in descriptions for Racing M logo possibly a 60 mm logo, follow up with Mercury for updates on their part books.

8M0085374 DECAL M-ICON 60 MM Racing Confirm size

Installation instructions V8 Accent panels

Force 120 H.P. (1997) [0E203000 THRU 0E287999] - USA - Cat.# 90-809770 

 > Mercury Marine [Updated: Feb. 18, 2023] > Outboard > Force > 120 H.P. (1997) > [0E203000 THRU 0E287999] - USA - Cat.# 90-809770

 

Cowl Assembly (Top) Diagram 20013

1) 0100 819747A7 TOP COWL ASSEMBLY (Without Decals)

13) 0037 820738A95 DECAL SET Top Cowl (Force Models) (Includes Front-Rear-Port-Starboard)
NS 0037 809862A96 DECAL SET Top Cowl (Force Tracker Models) (Includes Front-Port And Starboard Upper And Lower Wraparound Style) [0E138600] THRU [0E252999]
NS 0037 852954A97 DECAL SET Top Cowl (Force Tracker Models) (Includes Front-Port And Starboard Upper And Lower Wraparound Style) [0E253000] THRU [0E287999]

Force -SPECTRUM & BAYLINER - MAXUM - 50 H.P. (1990) - ARCHIVE CAT FOB4492-1 

 > Mercury Marine [Updated: May. 15, 2023] > Outboard > Force > 50 H.P. (1990) > ARCHIVE CAT FOB4492-1

FORCE 1990 50 H.P. SERIAL NUMBER (1990)
"A" MODELS  
"B" MODELS  
"C" MODELS

ENGINE COVER (FORCE MODELS) Diagram

FS684712 ENGINE COVER (UNPAINTED) - 35/50 HP
F2C717712 ENGINE COVER COMPLETE (PAINTED W/DECALS) - 35 HP
F2C718712 ENGINE COVER COMPLETE (PAINTED W/DECALS) -50 HP

FS684712, F2C717712, FS684712, 818090A1,F2C718712, 
FS684712 F2C717712 FS684712 818090A1 F2C718712

2) F717892 DECAL, FRONT
3) 37-817985--1 DECAL, US MARINE
4) F717396 DECAL, STARBOARD SIDE
4) F717397 DECAL, PORT SIDE
6) F663366-1 MEDALLION (FORCE)

12) F717528 DECAL, REAR- 35 HP
5)  F718528 DECAL, REAR - 50 HP

 

ENGINE COVER SPECTRUM & BAYLINER MODELS

1 FS684712 ENGINE COVER (UNPAINTED) - 35/50 HP
100-818090A1 ENGINE COVER COMPLETE (PAINTED W/DECALS) - 35 HP
100- 819748A3 ENGINE COVER COMPLETE (PAINTED W/DECALS - 50 HP

FS684712, F2C717712, FS684712, 818090A1, 819748A3
FS684712 F2C717712 FS684712 818090A1, 819748A3

2 FX717892 DECAL, FRONT
4 FX717396 DECAL, STARBOARD SIDE
4 FX717397 DECAL, PORT SIDE
6 F663366-1 MEDALLION (FORCE) Order 3
5 FX718528 DECAL, REAR - 50 HP
12 FX717528 DECAL, REAR - 35 HP
17 F694366 MEDALLION

 

ENGINE COVER MAXUM MODELS

1) FS684712 ENGINE COVER (UNPAINTED)
1) 100-818097A1 ENGINE COVER COMPLETE (PAINTED W/DECALS)

2) FZ718892 DECAL, FRONT
4) FZ718396 DECAL, STARBOARD SIDE
4) FZ718397 DECAL, PORT SIDE

6) F663366-1 MEDALLION (FORCE) - ORDER 2

12) FZ718528 DECAL, REAR

 

27 F703398 DECAL, FUEL MIX

ELECTRICAL COMPONENTS

2)  FA609853 DECAL - ORDER 2
41) F529398-1 DECAL WIRING

 

REED PLATE AND ADAPTER FLANGE

13) 37-817792A1 DECAL, TIMING W/LITERATURE ORIGINAL FORCE P/N A433387-1 


SWIVEL BRACKET AND STERN BRACKETS
26 F544390-1 DECAL, TILT LOCK

MOTOR LEG
18 F716374 DECAL, REAR LEG (FORCE MODELS)
18 F717374 DECAL, REAR LEG (BAYLINER & MAXUM MODELS))
19 F717893 DECAL, SIDE LEG (BAYLINER & MAXUM MODELS)) - Order 2

More Articles …

  1. Remote Controls and Components - Panel Mount - Mechanical > [1994 & Up] - Cat.# 90-8M0125570 - Commander Classic (88150A27 - A32)
  2. Avator Outboard Electric - 7.5e 1KWH - 1 HP Cat.# 90-8M0204342
  3. 4 Stroke 400R HP 5.7L V10 Verado Racing - Cat.# 90-8M0188524 
  4. 4 Stroke - 350/400 HP 5.7L V10 Verado SeaPro - Cat.# 90-8M0188523

Subcategories

  • Mercury-Mariner-Tracker-Force Outboard Decals

    DECAL DRY APPLICATION

    IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or service of our products. If you have not been trained in the recommended servicing or installation procedures for these or similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or operating the product.
    NOTE:After completing installation, place these instructions with the product for the owner's future use.
    IMPORTANT: This decal set must be applied dry. Do not use a soap and water mixture to apply this decal set.

    Tools, Materials, and Surface Requirements

    Tools and Materials

    • Decal application squeegee (3M® Applicator PA 1 Gold - recommended)
    • Air release tool (3M Air Release Tool 391x) or a straight pin - used to remove trapped air bubbles
    • Clean microfiber towel (Meguiar’s® Supreme Shine Microfiber Towel - recommended)
    • Spray bottles and labels for each cleaning solution
    • Cleaning solution:
      a. Liquid dishwashing soap
      b. Isopropyl alcohol
      IMPORTANT: Identify each spray bottle of cleaning solution with a label.

    Surface Requirements

    Special attention is required when applying decals to certain surfaces, including primed, painted, and certain plastics. All
    painted surfaces must be cured per the manufacturer's requirements. When applying decals to plastic surfaces, allow proper
    time for out gassing.

    Surface Preparation

    Application Temperature

    Apply the decal when the surface and ambient air temperature is between 16-373 °C (61-99 °F).
    NOTE: Applying the decal near the minimum temperature specification, the adhesive bond will develop more slowly than temperature in the mid to upper specification range.

    Step One General Cleaning

    IMPORTANT: Do not shortcut the cleaning process. All of the surfaces are considered contaminated prior to a thorough
    surface cleaning preparation.

    1. Mix a solution of 29.5 cc (1 fl oz) liquid dishwashing detergent with 3.7 Liter (4 US qt) of warm water.
    2. Rinse cowl with clean water.
    3. Dry the cowl with a clean Meguiar‘s Supreme Shine Microfiber Towel.
    4. Avoid detergents or preparations that contain waxes, oils, or lotions.

    Step Two Solvent Cleaning

    1. Mix a solution of isoprooyl alcohol and water to a 1:1 ratio. Store in a spray bottle and identify the solution with a label.
    2. Saturate a clean paper towel with the isopropyl alcohol and water solution.
    3. Wipe the cowl with the saturated towel followed immediately with a lint-free towel before the solution evaporates.
    NOTE: Isopropyl a/coho/ evaporates quickly. You must Wipe the surface immediately after applying the solution.
    4. When the paper towel becomes contaminated with dirt, discard it and use a clean paper towel saturated with the
    isopropyl alcohol and water solution.
    5. Ensure the surface has no contamination and is completely dry.
    6. Start to apply the decals immediately after solvent cleaning.

    Decal Application

    Application Tips

    1. Ensure that the surrounding work area and the surface are properly cleaned to avoid contamination.

    90-8M0143239 eng MARCH 2018       © 2018 Mercury Marine      -     Page 1 / 16

  • Evinrude-Johnson Outboard Decals
  • Nissan-Tohatsu Outboard Decals
  • Yamaha Outboard Decals
  • Suzuki Outboard Decals
  • Honda Outboards